Innovatint - LAB Changes *************************************************** v1.7.5.3 NEW FEATURES: ENHANCEMENTS: * Remote support 15.20.6.0 (needed because old version expires) BUG FIXES: * Database creation script was out of date *************************************************** v1.7.5.2 NEW FEATURES: ENHANCEMENTS: BUG FIXES: * Error: Column 'UFICODE' not found, in site export *************************************************** v1.7.5.0 NEW FEATURES: ENHANCEMENTS: * Improved licensing BUG FIXES: *************************************************** v1.7.4.0 NEW FEATURES: * Updated licensing to Innovatint 3 standard ENHANCEMENTS: * Fixed unicode issue in statistics BUG FIXES: *************************************************** v1.7.2.0 NEW FEATURES: ENHANCEMENTS: * Fixed issue with measuring when device returned unknown values for aperature, geometry or uvmode. BUG FIXES: *************************************************** v1.7.1.0 NEW FEATURES: ENHANCEMENTS: BUG FIXES: *************************************************** v1.7.0.14 NEW FEATURES: ENHANCEMENTS: * Added support for color correction proposed colors section for the user to copy formula into multiple colors at once. * Added support for sorting the color correction proposed colors view. * Added support for sorting the history panel items. BUG FIXES: * Formula not correctly saved as current version and with accepted status if only one color is matched for one product. *************************************************** v1.7.0.13 NEW FEATURES: ENHANCEMENTS: BUG FIXES: * Fixed issue with LAB value calculation to be missleading in measurement window. (counting a sum into first row!) * Fixed issue with extender taken into account in color correction formula synthetization. * Fixed issue with selecting already measured color using search caused the crash of the program. *************************************************** v1.7.0.12 NEW FEATURES: ENHANCEMENTS: * Modified the closest search to allow measuring with other than spehere devices. BUG FIXES: *************************************************** v1.7.0.11 NEW FEATURES: ENHANCEMENTS: * Added checking of bootstrap components selected for exportation in advanced item selection mode when characterization samples have been selected. * Added saving question and also support for deleting barcodes using delete. * Added support for limiting missing formula matching based on formula version missing and formula status for LAB history. * Added support for setting color data class for free text importation. BUG FIXES: * Added missing nix device types. * Fixed issue in dispense queue showing incorrect amount for items made in POS when gravimetric unit was selected. * Fixed issue with barcode generation. * Fixed issue with barcode generation. * Fixed issue with formula copying not applying factors. * Fixed issue with match only missing selections when no colors match the limiter. * Fixed issue with removing comments. * Fixed issues with barcode generation and removal. *************************************************** v1.7.0.10 NEW FEATURES: ENHANCEMENTS: BUG FIXES: *************************************************** v1.7.0.9 NEW FEATURES: ENHANCEMENTS: * Added min and max fill warning icons into color correction screen. * Added original code automatically saved as internal notes when formula from different color is used. * Added support for warning if not all the mixtures are generated by the mixture proposer in characterization. BUG FIXES: * Fixed custom can size is not selectable when creating new formula. * Fixed issue of adding new reference formulas if no formula existed before. * Fixed issue of not setting correct text in color correction when opacity cr was used instead of de in formula internal notes. * Fixed issue that LAB was not asking about linking the formulas when moving LAB history formula to current one. * Fixed issue with formula filter not remembering filter options correctly when user moved away from the page. * Fixed issue with incorrect formula count in formula management. * Fixed issue with saving formulas that breaks matching rules checks rules always for the first formula in matching results even though some other formula was selected. * Fixed issue with substrate deletion allowed even though the substrate was used in matching settings. * Fixed issue with zone names not in alphapetical order. * Fixed issues with colorimeter device measurements. *************************************************** v1.7.0.8 NEW FEATURES: ENHANCEMENTS: * Added option to only export mandatory substrates. * Alternative list select formula now shows green border. 1052 * Fixed issue with comments saving breaking the numeric values into multiple parts and messing up the comment. * Improved dispense queue loading speed. BUG FIXES: * Fixed issue of formula management showing incorrect number of colors when copy all button was clicked. * Fixed issue of not showing colorants in reference formulas section when creating completely new formula. * Fixed issue of showing huge list of recently dispensed formulas in dispense queue. * Fixed issue that formulas were transfered even though user didn't choose any color cards. * Fixed issue with saving formula into multiple products didn't close the progress dialog. * Fixed issues with creating site installation packages with customized user password. *************************************************** v1.7.0.7 NEW FEATURES: * Added support for commenting formulas based on l ENHANCEMENTS: * Added cost into formula management price calculation results. * Added dl*,da*,db * Added option to toggle selection of products in product linking dialog. * Added support for checking if the formula is exactly the same into batch copy operations if the formula is the same then formula is not copied into the product multiple times. * Added support for extracting the zone name in statistics orders. * Added support for printing the product specific formula comment into label from LAB. * Added support for showing the zone name in statistics orders section. * Blocked user from saving empty can sizes in product management. * Formulas are not now automatically marked to be linked to all products in matching results. * Improved color uses view so that if only one color name is defined for that color then in the view only one row is shown. * Improved reference formulas section. * In management and analysis section also review status formulas are displayed with red icon in the formula version select combo box. * Maximum number of banners changed to be 6. * Reference formula saving now notifies the user that extender is not saved. * Updated color difference strength calculations results to be displayed into own table. BUG FIXES: * Fixed can sizes in formula versions was incorrect as it showed all can sizes in the database. Now changed so that only shows can sizes available on that product. * Fixed color correction measurement etc section enabled when color without formula has been selected. * Fixed color name saving doesn't save empty names into database. * Fixed color names were not imported from datacolor mdbunv format. * Fixed color rename problem * Fixed focus problem at formula management when linking formula to multiple products the progress dialog might be shown on top of acceptation of the rules which made the program to look like it's frozen although the program was waiting user action for rule breaking. * Fixed formula comment multiplied. * Fixed free text export did not use system decimal separator for the de. * Fixed issue with color correction showing batch measured before measurement was actually done. * Fixed issue with double comments. * Fixed lh comment when cr was used in stead of de. * Fixed matchcom activation dialog was not shown. * Fixed problem with color correction not updating the prices when correction results are received. * Fixed reference formulas not clearing the management view when all formulas were deleted. * Fixed removal of base paint when blended base had base paint specific rules. *************************************************** v1.7.0.5 NEW FEATURES: ENHANCEMENTS: * Added asking for saving changes in color rename section when user changes color card. * Added red icon for site users which doesn't belong to any groups in zones --> site UAC section. * Added support for applying shading only for selected colors not for the entire color card. * Added support for giving shading amount also in specific unit and can size. Note: this will only be possible when product and base paint has been selected. * Added warning when loading label into database fails. * Advanced item selection paste option will only affect on the selected item and it's sub items. * Allowed to display only price group if all the rest of this information is missing. * Blocked user for adding advanced copy rules to template without name. * Changed warning text to correct one when user is adding too long color names or recoded color code is too long. * Improved editing the values in pricing section. Now also clearing the field while in edit more allows user to clear the value. * Improved loading of colors in the color correction, formula management and reference formulas section. * Improved reading large mdbunv files in. * Small improvements to mdbunv file importation so that it now ignores all the formulas during the importation which doesn't have base code, product name or color code defined. BUG FIXES: * Automatic lh comment was not working when contrast ration was used in matching. * Fixed a problem with matching only one color and not getting the formula comments set on the main page to the results page. * Fixed formula filter text was not updated correctly when user changed can size. * Fixed gravimetric fill was not calculated correctly. * Fixed issues that preferred color card information was not cloned correctly when cloning zone. * Fixed matchcom activation dialog was not shown in the cases when datacolor license was ended. * Fixed memory leak when changing system. The color correction section loaded all the color from the database. In large databases this caused application to crash. * Fixed price group set for specific product and color was not taken into account. * Fixed problem of setting product into none system in product listing. * Fixed problem that cost was forced to use comma as decimal separator in free text export format. * Fixed problem that the translucent mode did not stay "on" when measuring a completely new color in this mode. * Fixed problem with copying colors from one card to another was not working. * Fixed problem with incorrect scaling if can size specific nominal fill was set. * Fixed problem with saving ean barcodes in pricing section. * Fixed process dialog freezing in advanced importation. * Noticed that just price group can't be saved for the color product specific table. * Shading colorants allowed saving of negative values of colorants into database. *************************************************** v1.7.0.3 NEW FEATURES: ENHANCEMENTS: * "database installation package" changed to "lab database installation package" to avoid any confusion which package should be generated for shop usage. * Added rule checking of the formulas in color correction section. * Added support for calculating characterization set component rgb values automatically based on synthesized samples. Note: synthesized sample with highest chroma value will be used as rgb presentation for the colorant. * Added support for copying computer id into clipboard while installing the protected database package. * Added support for editing formula comment icons in zone formula comments section. * Added support for merging characterization set components. * Added support for searching based on color name also in matching settings color selection page. * Added support for two new calibration types uv1 and uv2. * Changed print label text to export when multiple colors are selected in formula management. * Forced colorant in formula to be a last column in free text export to avoid problems with importation. * Improved advanced copy functionality usability. Removing templates was not working correctly. Also modifying the templates was misleading because clicking on save icon on top was required for the change to be saved. Now the change will be saved automatically when new rule is added, changed or removed. * Lab database setup package will now inform user during the installation that the package is meant for LAB. Information will only be shown if no LAB installation has been detected. * Matching settings losing template selected can size in color correction. This problem has been fixed. Note: in color correction the engine uses the can size selected for the formula display. * Prevent removal of all samples if one of the base characterization components has been changed from non existing. Currently only samples related to changed component will be removed. ........ * Unified remove and delete usage in button texts. BUG FIXES: * Fixed a problem of not showing a correct error message while importing characterization sets and substrate with same name already exists on the destination database but has different reflectance data. Note: in these cases the set wont be imported! ........ * Fixed a problem that newly typed in color is marked as measured even though only color name is given. * Fixed a problem when copying formulas from one product to another. There were no checking if the same formula was already on the product and copying with "move the old version as POS history version" option on would cause unnecessary POS history version of the exact same formula. * Fixed a problem with characterization bootstrap component change didn't ask about clearing the samples with that component. * Fixed a problem with color management removing colors if color data was changed and then color was tried to remove before saving the process failed. * Fixed a problem with no proper error message on the matching statistics when saving the formulas and base paint multiply value has been set to 0. * Fixed an issue with colorant amounts in formula exported with ',' instead of '.' in free text format exportation. * Fixed an issue with colorant amounts in formula exported with ',' instead of system defined decimal separator in free text format exportation. * Fixed local user permission saving. * Fixed measure did not add the color into color card automatically in matching section. * Fixed no error message was shown when error happened when measuring in new substrate. * Fixed problem of calculating alternative formulas for color in color correction section if the product didn't have any formulas. * Fixed problem of linking formulas into multiple products in matching results section. * Fixed problem of saving color into color card in matching section. * Fixed problem of saving single match results into dispense queue. * Fixed problem that not all measured colors were loaded in color difference section if all colors in selected card were not measured. * Fixed problem that zone advertising showed splash images on the banner section. * Fixed problem with color correction when measuring a batch (in this case opaque sample) it show a preview. However when you close the window and open it again the preview is gone. * Fixed problem with color correction when measuring black/white -> delete measurements -> measure opaque -> click ok -> first measurements are saved. * Fixed problem with searching with ' in the key. *************************************************** v1.7.0.2 NEW FEATURES: * Added support for viewing the card name in the zone in color card rename section in export / import. ENHANCEMENTS: * Added amount column into zones -> products in group section to display in how many groups the product is in that zone. * Added application setting for default wet film thickness. * Added option to use same liquid codes as in source in import/export function. * Added possibility to view base ks modifier in the base characterization. * Added status icons for measured batch and measured standard in color correction. Green means that measurement has been made and red that it's not made. * Added support for closest color section in color management to show products which are having formulas for selected color code. * Added support for deleting / moving formulas into LAB or POS history in formula checking list at batch operations. * Added support for directly dispensing from color correction * Added support for editing the component in characterization set components view. * Added support for manually removing characterization set components from the database. * Added support for manually saving formula into desired status in color correction. Note that saving as a “accepted” or “controlled and accepted” will also move the formula into current version and saving as “working version” or ”controlled and rejected” will move the formula into LAB history. * Added support for pasting color codes in configuration -> color management -> colors section making filtering a bit easier. * Added support for remembering the used measure type. * Added support for setting "use product notes" by one click from product in zone table header. * Added support for showing all compatible products in matching results section when user is accepting formulas. * Can size in matching template will stay the same even when moving back and forward in the matching section. * Changed import to use um instead of ml in datacolor match pigment format. * Changed previous can size is remembered when user is switching products in formula management. Note: can size has to be set into use for base paint. * Changed so that color correction -> show details -> numerical -> for formula (measured) and corrected (theoretical) shows dl, da, db instead of absolute values. * Changed so that only by starting new matching work the matching results are cleared. * Color cloning will now also clone the color reflectance data and color names. * Fixed fill rgb progress bar visible all the time. * Fixed problem with color difference that measurement was not shown when measuring without selecting color card. * Forced user to select color card before the color rename section can be used. * Improved color rename section so that changes can be applied to only selected colors and that only colors which are not in any other card can be listed. * Improved colorant statistics exportation so that it chart is readable when lot of colorants in the statistics. * Improved internal and external reflectance value changing so that warning of ks value removal is shown only once when changing the values and once when saving the changes. * Improved matching settings pdf export so that weights are displayed correctly on page when long names are used in settings. * Improved measured/unmeasured detection to take into account colors which have been imported with reflectance data in color management -> measure section. * Improved order sending to site so that also edited or new formula can be send directly to the site without a need to save it as current version first. Note: formula will be saved as working version. * Improved speed and memory usage in free text import. * Product overview section now shows how many formulas there are in total and how many are in current versions. * Saving formula as working version in color correction will put the formula status to value control. BUG FIXES: * Changed color information wont be imported / exported if color cards or option "colors not in any cards" are not selected. * Fixed a problem of linking one characterization set component to colorants when same colorant is available on multiple systems. * Fixed a problem of price groups showing up in wrong order. * Fixed a problem that colorant replacement batch operation reserved too much memory causing application to crash when huge number of formulas were changed. * Fixed a problem when loading substrates and math failed because zero division error. * Fixed a problem with advanced item selection in import/export functionality. * Fixed a problem with color correction section not loading the products on system change. * Fixed a problem with colorant removal. Removing colorant was not possible when product specific rules for colorant existed. * Fixed a problem with formula display with can specific nominal fill. * Fixed a problem with renaming the product group after adding a new group and without saving between. * Fixed advanced export / import didn't move the linking information correctly. In some cases the linking information was lost. * Fixed advanced item exportation of characterization set with hardeners. (without selecting the hardener the samples can't be exported!) * Fixed checking of the rules in batch operations copy function was not working correctly if max amount of colorant was set to 0. * Fixed cloning colors into new color card did not copy the color reflectance values. * Fixed color card section so that it automatically updates which colors are not in color cards. * Fixed color measure date was not shown. * Fixed creation date filtering didn't take conversion between local time and utc time into account. * Fixed error in mini gdata exportation even though the actual generation was successful. * Fixed export to free text did not take can size specific fill level into account. * Fixed exporting extender amounts into txt file was not working. * Fixed exporting/importing prices into/from excel. * Fixed largo importation problem with special characters. * Fixed problem of loading formula in formula management section when no can sizes has been defined in the database. (fill is zero --> divided by zero error) * Fixed problem with can size selection being disabled / enabled at wrong times on product rules page. * Fixed problem with color management -> color cards -> change color card name -> click other field -> ask to save -> no -> change is made anyway. * Fixed problem with color management -> measure -> only unmeasured colors is not working anymore. * Fixed problem with color management -> measure -> remove measurements -> does not save changes, so measurements comes back. * Fixed problem with custom can size and label printing. * Fixed problem with system rule copy when destination system had already some rules. * Fixed problem with too long label names didn't raise an exception. * Fixed shortcuts not click able *************************************************** v1.7.0.1 NEW FEATURES: ENHANCEMENTS: BUG FIXES: *************************************************** v1.7.0.0 NEW FEATURES: * Added management tools for substrates into configuration section. * Added support for 3d view in color difference section. * Added support for bfs26 formula guidelines. Grade for formula is visible at formula management section. * Added support for calculating more than one formula for each color in file matching. User is able to browse and select one of the alternative formulas directly into use while the engine is still matching the other formulas. This is a new option in matching settings page called "number of formulas for each color" if user leaves this value to one then no selection options are available and the formula is displayed in the same way as it was previously. * Added support for creation of new systems during export process into destination database. When this option is selected all selected products, colorants and color cards will automatically go into this new system in the exported database. Also all other system selections are ignored. * Added support for direct printing into color difference page. * Added support for directly saving orders into site dispense queue from LAB formula management section. Saving is possible for all sites saved in the database and also customer can be selected and note for the order can be given. * Added support for directly saving orders into site dispense queue from LAB formula management section. Saving is possible for all sites saved in the database and also customer can be selected and note for the order can be given. * Added support for downloading measurements from spectro memory. * Added support for filtering results by formula measurement status in color correction and in formula management sections. * Added support for formula quality checking against the characterization data in batch operations. This section calculates reflectance's for formulas based on the ks values of components and then compares the calculated reflectance to measured color reflectance. Formulas which get higher color difference than the limit are then listed as problematic ones. * Added support for hiding linking of characterization set components in advanced exportation. When this option is enabled all exported colorants and bases will have their own component in characterization section. Note: characterization sample data can't be copied while this is selected. * Added support for importing colibri formula files. Note: product and colorant information must be typed in before the import can be made. * Added support for importing datacolor match pigment xml-files. * Added support for importing datacolor tools files (*.Qtx). * Added support for importing largo lrf, lrc and lrp files. * Added support for limiting color codes in formula management by pasting a list of codes from clipboard or using the previous filtered results. This allows user to search by one criteria and use those results as a source for a new search. * Added support for multiple measurements for color based on color measurement device. Sphere measurements are used in matching and characterization sections! In the closest search and colors section under color management it's possible to view measured from different devices. Measure page shows measured/unmeasured colors based on the current device connected to LAB. * Added support for reference formula management, easier adding new formulas and automated function to propose which colors would help the "search" and "search and correction" functions to perform better. * Added support for selecting between opacity cr and opacity de in matching. In options --> application there is a new option for opacity which can be used for selecting the desired display type. Note: this will only affect on color matching section. * Added support for setting web links and location of those links in POS banner at zones advertising section. * Added support for skipping update for some program modules. Meaning for example that if user wants to stay in certain version of matchcom engine the update popup wont be shown for the matching engine module at all. * Added support for using measured color as a characterization sample. ENHANCEMENTS: * Added +,- and % signs for color difference page numbers to clarify meaning of the numbers. * Added better management tools for reference formulas so that user can decide which formulas are in use and where. * Added checking that formula calculation confirms that at least one base paint has been selected before starting the actual calculation. * Added encoding selection option for largo lrf files with preview to ensure that correct encoding has been selected. * Added hardener amounts into characterization export formats (text and pdf). * Added more search options into database protection section and also a limiter by zone. * Added support for automatically saving de and opacity de into internal comments in color correction. * Added support for automatically saving de and opacity de values into internal notes section during matching. Note: cmc(2:1) color difference equation is used in calculation. * Added support for exporting also color names into when exporting formulas into free text format. * Added support for free text export to export also color names in formula export option. * Added support for manual correction in color correction section. * Added support for moving multiple formulas at once into LAB or POS history formulas into formula management section. Note the moving will only apply formulas in the filter and in selected product. * Added support for only loading orders with feedback in statistics section. * Added support for removing or moving formulas in batch operations for colors which are not in any color card. * Added support for selecting different base unit for export free form text. * Added support for setting characterization liquids a sub type which describes if the base is white/tinted/transparent or medium white. For colorants there are dark, light, white and black types. * Added support for setting database icon, which will be shown on POS when selecting from multiple databases. * Added support for setting default matching setting which will be selected in matching settings, results and color correction pages automatically. 1217 ........ * Added support for skipping report generation from batch operations move/remove operation in order to speed up the process. * Advanced item selection module in export/import section now also has a support for renaming colorants during the exportation. * Advanced item selection will now only select/unselect all visible items. (previously all items were selected even though the items were hidden.) * Allows user to change bootstrap components when only base characterization is possible. * Blocked user from updating view in matching results section when single color matching has been made. User has to choose save or reset before update action comes available. * Changed application defaults section so that it now asks about saving the changes made on that page. * Changed color correction to have only one "dispense" button. When there are changes then a message asking for "dispense only changes" is shown. * Changed export module to use ',' instead of '.' as decimal separator so that excel detects colorant amounts correctly. * Changed formula comment to "general notes" and internal comment to "internal notes" also in import / export section. * Changed so that chancing active system doesn't reset the selected zone in zones view. * Changed so that exporting into old database versions is not supported anymore. * Changed that the activation shows correct license window for datacolor matching engine. Problem arises if the application has been started in demo mode and LAB activation has been made and without restarting LAB the datacolor matching license window is shown. * Copy with plug-in doesn't link the formula into destination product if the plug-in is unable to convert the formula. * Ignored case while sorting color cards in export / import section. * Improved extender calculation so that now base paint rules are applied to the calculated amount. This means that minimum/maximum amount for extender can be set in base colorant rules and if max amount rule is set to 0 then extender wont be added. * Improved internet update so that it will allow user to set update group for LAB and WGS. This will give more control which versions are available for downloading. * Improved matching engine licensing to allow lower license level operation. * Improved usability of color correction module. * In measurement dialog the focus doesn't automatically move from black to white measure button when measuring over substrate. * Lh comment is not added for white bases. In order for this to work user has to set liquid subtypes correctly at characterization set components page. * Moved abstract bases section under products section in configuration constants so that user interface fits better for smaller screens. * Moved dispense queue from "matching and characterization" into "management and analysis" section. * Pricing moved under zone section. * Product rules page doesn't jump back to common rules tab when saving. * Support for sorting based on selections in characterization set components page added. BUG FIXES: * Added the rgb icons also for colors which doesn't get formula from matching. * Blocked user for writing too long substrate codes. * Database triggers had a problem when user was using product specific comments. This bug caused formulas to move from current version into POS history version and then be hidden from POS ui. This problem came up only when user is using product specific comments on LAB site. When directly connecting to consolidate database this problem doesn't come up. ........ * Extender calculation will not add the extender if it's amount is less than 0.1% of total colorant amount. * Fixed "full backup now" operation backup section. ........ * Fixed "skip always" software update was not working. * Fixed a memory leak in largo importation. * Fixed a problem in calculating de for colors measured over substrate. * Fixed a problem in statistics order exportation into free text. When row was missing a formula exportation of whole file was failing. * Fixed a problem of changing the characterized component status incorrectly after bootstrap component has been changed. For example in the case when user changed one bootstrap mixture to another all the other components were marked as "under work" state, but after browsing a bit in characterization the status was again updated to "characterized". * Fixed a problem of exporting when no zone has been selected. * Fixed a problem of importing free text format when number was given as basename. * Fixed a problem when creating an f-link file and the save destination was not available only a error box without message was shown to the user. Now proper error message with the file path is shown. * Fixed a problem with LAB recovery mode was not working. Reason for this was that one module tried to connect database even though there were no database connection defined. * Fixed a problem with characterization add component when only base characterization is available. * Fixed a problem with characterizing white base as bootstrap white component. The base was not showed at ks-analysis page when bootstrap was selected. * Fixed a problem with color difference measurement section enabled "measure over white" by default even when substrate was not selected initially. Correct behavior is to enable "measure" button when no substrate is selected. * Fixed a problem with formula importation from fix file. Without this fix the formulas would go into working versions into database. * Fixed a problem with sum / total row showing incorrect value when user was creating a new formula. * Fixed export multiple formulas into text in formula management used "." as decimal separator and this was interpreted as a date by excel. Solved by using ',' as decimal separator. * Fixed export problems with colors having invalid reflectance values saved into database. * Fixed filtering with options no formula and inverse filtering being on resulted incorrect results. * Fixed formula management multiple label exportation to use "." in colorant amounts. This caused a problem that the excel detected the amounts as dates. * Fixed issues with database protection and only exporting one of the databases. * Fixed problem in color correction alternative formulas section didn't clear the view between formula calculations. * Fixed problem of exporting statistics in any other than milliliters in text export format. ........ * Fixed problem of saving custom color back into the database when base code used in that formula was not available on the product selected. * Fixed problem of setting characterization linking in some cases. * Fixed problem saving f-link creation settings in options -> dispenses section. ........ * Fixed problem with batch operations move formulas function. By accident user was able to move matching results into some other version before accepting the formulas. This caused that the formulas would be in initial status in the database and therefore not visible in formula management. * Fixed problem with color difference export that the legend was not correct. * Fixed problem with color measurement and saving. In case where user changed color code to something else without pressing save first and then answering yes for the save changes question the measurement was saved to wrong color code and in case when color code already had a measurement an error was shown. * Fixed problem with formula history versions didn't show the sum/total without changing the unit after loading the view. * Fixed problem with long colorant codes in characterization page caused that the proposer was unable to create mixtures, because too long sample name when colorant codes were combined into sample name. * Fixed problem with orders export in statistics by moving the formula column to be the last column in the table. This way opening the file in excel doesn't mess up the columns. * Fixed site selection in statistics product exportation caused sometimes error: "typeerror: cannot concatenate 'str' and 'int' objects". ........ * Fixed statistics order section export problem with formula column messing up the exported data and making it hard to read. Problem was fixed by moving the formula column to last column. ........ * In characterization section when only base characterization module is enabled the characterization data for colorants was lost when user changed any components in the characterization set. * Matching section used the theoretical opaque reflectance for color difference calculations when colors were measured over substrate. This is now fixed so that the real measurement over white is used for comparison in these cases. Same way as the datacolor matching engine does. *************************************************** v1.6.6.2 NEW FEATURES: ENHANCEMENTS: * Added support for searching by computer id in protection section. BUG FIXES: * Blocked generation of unlock code without computer id in protection section. * Fixed a problem in matching results page color tab, user was unable to add color into dispense queue. * Fixed a problem with site installation package showing "unable to read computerid!" when database protection has not been enabled. * Fixed import report showed count for mformulas even when no mformulas were imported. * Fixed problem of exporting rules when colorants are renamed during the export process. * Fixed problem of saving formulas in formula management if no formula has been selected before creating a new one. *************************************************** v1.6.6.1 NEW FEATURES: ENHANCEMENTS: BUG FIXES: * Fixed matching results section didn't update the overview according to selected alternative formula. * Fixed problem of exporting into free text format if matching engine is missing. (not possible to export) *************************************************** v1.6.6.0 NEW FEATURES: * Added free dispense text instead of empty for free dispense in statistics view. * Added remove duplicates from formula comments. * Added select all / none check box into table headers for better usability. * Added support for calculating alternative formulas in color correction section. * Added support for cleaning the database from almost duplicate color codes and merging the formulas. * Added support for clearing formula comments in batch operations. * Added support for creating product and color card collections. * Added support for enable/disable automated update checking. * Added support for exporting accuracy for formula in free text export. * Added support for exporting matching reports into xlsx format. * Added support for multiple different flink file types. * Added support for printing labels from color correction page. * Added support for product specific comments in formulas. * Added support for replicating translation and theme files to POS. * Added support for saving website links for POS. * Added support for scaling formulas in batch operations. * Added support for searching based on orderid barcode also in formula management. * Added support for searching by accepted date. Also the date saved with formula gets updated when user accepts the formula. * Added support for searching formulas in matching results page. * Added support for selecting color codes in matching settings also with shift or ctrl and selecting them all into use at once. * Added support for separate search and correction formula bank. * Added support for setting default thickness while importing search and correction formula bank. * Added support for setting feedback email templates in LAB. * Added support for showing if the color and the formula are measured or not. * Added support for user access control in LAB. * Added support for viewing and setting characterization linking also based on abstract base. * Matching result colors section now shows all formula versions for selected color at once so that comparison between current and matched versions is easier. ENHANCEMENTS: * Added metameria value into matching statistics. * Added option to group by color card in statistics colors section. Note that the color card is that one which is saved during the order creation. * Added progress dialog for saving in products in zone and in color cards in zone sections. * Added select all/none sections for data types. * Added support for adding color into color card when user is measuring new color in matching settings. * Added support for additional reports in database overview. * Added support for changing formula status in formula management. * Added support for checking also matchcom and sql anywhere updates. * Changed "select all" --> "copy all" in formula management section in order to make copying color codes faster. * Changed so that can sizes available in products are showed first on matching settings. * Color correction added support for searching and proposing color codes for measured formulas from existing and measured color codes. * Focus of measure dialog automatically set to measure button instead of calibrate. * Improved color correction working so if user changes the formula status from dispense to something else also local order will be deleted if it's not yet dispensed. * Improved color section in color management so that no resetting the selected color card when not saving the changes. * Improved matching results usability by not loading all the information again when user re-enters the view. Also color card or product changes need now update to work. * Improved statistics orders section to show machine operator, dispense time and flags for each order. * Warning user about open connections to database and asking a permission to automatically close the connections. BUG FIXES: * Allow space character in colorants section. * Common config data in site UAC is now taken into account when showing site specific settings. * Fixed a problem in matching results section where the color code was hidden in color code list when user was matching single color. * Fixed a problem with label printing in formula management and in dispense queue when color was missing LAB or reflectance values. * Fixed clearing formula status field in formula management when color without formula got selected. * Fixed color section reset button stayed disabled if user only changed barcode. * Fixed in correct metameria value showed in results details. * Fixed problem of not clearing the color code filter in color management color cards section. * Fixed problem of not enabling the next button in matching setting section when user added a new color. * Fixed problem of percentage values in label at formula management were not displayed correctly. * Fixed problem of starting color difference measured naming from 1 again when user switched view and came back. * Fixed remove formulas in batch operations reported wrong total amount. * While creating shop installation package the user interface showed select all zones option. *************************************************** v1.6.5.1 NEW FEATURES: * Added support for setting alternative barcodes for cans. ENHANCEMENTS: * Added progress dialog for cloning zone. * Added support for cloning characterization set components. (note cloning will clone the component in all sets.) * Added support for importing formula comments from mdbafb format. * Added support for linking all compatible products to formula by double clicking. * Forced user to set nominal fill and multiply in for base paint before saving is possible. * Moved the "enable custom color search" under order creation in site UAC. * Support for editing formula in matching results page added. BUG FIXES: * Fixed a problem of multiple can sizes linked into one base when creating a new product. * Fixed incorrect status shown for bootstrap if one of the components was changed to component which was not characterized. * Fixed problem of limiting statistics filters with date before 1.1.1970. * Fixed problem of loading the easyprint label from database at first time when print dialog was showed. *************************************************** v1.6.5.0 NEW FEATURES: * Added support for card readers and possibility to select the correct reader in application settings. * Added support for disabling automated software update check in LAB with command line parameter innovatintlab.Exe -no_update_checking. * Added support for importing fast & fluid prismapro 2 files (*.Sdf). * Added support for minolta colibri xml file importation. * Added support for placing sites on map and checking site status based on map icons. * Added support for setting matching metamerism limits and automatic me comment. * Update linked products question has option do not ask this again. ENHANCEMENTS: * Added checking and confirmation of unique base codes in import / export base code rename section. * Added colorant renaming and unique checking into gdata importation. * Added detailed information about export/import sources. For example now the actual output file name is displayed. * Added possibility to rename comments and comment codes in zones formula comments section. * Added refresh button into LAB site UAC. * Added scrolling into formula comments section. * Added sorting support and modifier column into dispense queue. Also orders added from LAB to POS will now show the user who added them into POS order queue. * Added support for checking that characterization sets are compatible before actual import/export. * Added support for limiting batch operations formula comments to only formulas which contain at least one of the selected colorants. * Added support for selecting all/none in advanced item selection in import / export. * Added support for selecting all/none in import / export zones, systems, products and color card section. * Added support for viewing customer notes in statistics section. * Added support for viewing formula in desired unit in statistics item details window. * Added support for viewing notes and internal notes in matching results page. * Added warning dialog when user tries to change characterization set internal or external reflection when k/s values are already calculated. Also forced user to remove k/s values when internal or external reflection has changed. * Allowed user to change formula status in color correction and save the status and commend changes only. * Barcode input now checks if barcode is already in the database and blocks saving of duplicate code. * Blocked user from editing internal or external reflection when there are no mixtures for some of the characterization set components in the database. * Changed purge every setting in site UAC to match same setting in POS so that days, hours and minutes are shown instead of only minutes. * Color difference section texts changed from selection 1 to standard and selection 2 to batch. * Dispense queue shows (*) at end of the can size which has been used for adding the formula into queue. * Extended filter to limit formulas also in matching results compatible formulas tab. * Fast and fluid prismapro 2 import now supports base paint renaming during the importation. * Formula management formula browsing of uncommitted formulas is now also possible. * Hardener column is correctly shown when hardener is set for use into product. * Import colorant or base paint names are not cut when user starts editing the text. * Improved backup log loading so that it's automatically reloaded when user creates new backup and for database triggerend backups added checking of new backups every 2 minutes. * Improved characterization linking with base paints so that saving is not required anymore when user wants to set characterization set into use for base paint which was missing a component before save. * Improved formula comment management so that if long comment is found from database already then shortening is used during the import. Also when user saved a new comment into database the long comment in formulas is automatically converted into shortening. * Limited possible characters for colorant codes so that only a-z, a-z, 0-9 and +- are valid characters. * Matching results color section now displays the currently in use formula with green background. * Matching results section moves automatically into next color when color is added to dispense queue. * Only can sizes for selected base are shown in color correction and in dispense queue. * Sdf format improved support for ignoring some missing fields. * Selection moves automatically to next color in matching results section when user accepts, rejects or adds color into dispense queue. ........ * Support for formula sorting in color correction added. BUG FIXES: * Fixed activation window is shown if demo or lease expires. * Fixed barcode saving problems in barcodes section. * Fixed blended base components are not shown colorants list in characterization linking section. * Fixed characterization colorants and bases section displayed rmd de white even it shouldn't display it. * Fixed characterization did not save the specific gravity for components in colorants or bases section even though it asked the value. * Fixed color name setting to zone in management and analysis formula management section. * Fixed formula management formula history versions did not update when new version was created. * Fixed over fill filter in formula management didn't work correctly if nominal fill + max fill was different than 100% enabled base addition in batch correction: max amount setting works. * Fixed pressing enter in activation dialog when typed in the license code now tries to activate program instead of closing the dialog. * Fixed problem color correction that when formula had sample data, but not actual measurement the calculation of edit change didn't show correct values. * Fixed problem in error reporting with barcode lookup * Fixed problem in formula management filter text displayed was showing incorrect values for colorant amount limits. * Fixed problem not listing sites in statistics site management section. * Fixed problem of adding new formula in color correct page without first loading some working formula. * Fixed problem of failing at accepting all colors results section if one of those colors is removed from the database during the process. * Fixed problem of loading application section when special characters were used in easyprint label names. * Fixed problem of losing free comments when accepting matched colors in matching results page. * Fixed problem of not opening all items in characterization linking page when open all button was pressed. * Fixed problem of searching colors in color management --> color cards --> all existing colors. * Fixed problem of selecting correct engine in database export when multiple database engine versions are available. * Fixed problem of showing changed values in color correct section even when only can size for the formula has been changed. * Fixed problem of showing incorrect de values in matching results section after the formula has been measured. * Fixed problem with characterization linking saving when colorant is available in multiple systems and value is set for multiple systems at same time. * Fixed problem with statistics showing colors without color code in all color cards. * Fixed problem with too long color codes in colour composer 9 color list export. * Fixed removal of replication problems when ftp server is not available. ........ * Fixed total amount in formula management didn't scale according to the scaling. * Fixed total colors in system calculation did calculate colors multiple times if color codes were in multiple color cards. * Fixed user can't create new formula in color correction section before selecting product. * In characterization compare view the de black and de white column header switched places. * Only ansi is supported by the cc9 for reading the list files. * Product removal is also automatically applied into product details page so that view gets correctly updated. * Progress reaches 100% now when site is exported / re-exported. * Txt export problem fixed. * Windows reports innovatint LAB crashing after closing the program in some computers. ........ *************************************************** v1.6.0.6 NEW FEATURES: * Added checking and removal of formulas which use colorant that is being removed from system. * Added more informative save dialogs. * Added possibility to add/remove formula comments in zone formula comments section. * Added possibility to automatically copy color code to alternative code and make automated modifications for the code while copying. * Added possibility to copy formula directly from formula management to clipboard in selected unit and can size. * Added possibility to easily copy, move and delete color names for multiple colors at once. * Added possibility to export colors into colour composer list files. * Added possibility to filter based on notes in formula management. * Added possibility to force certain colorant into formula during matching. * Added possibility to get xml delete messages of deleted formulas. * Added possibility to print test colors table in matching settings test colors section. * Added possibility to remove customer and data related to that customer. * Added possibility to remove zone admin users. * Added possibility to save product specific rules. * Added possibility to select can size and unit in matching statistics test colors section. * Added possibility to select valid email and label templates from compobox in site UAC. * Added possibility to set if base cost is used in matching or not. * Added possibility to set matching feedback limits, icons and texts. * Added possibility to set product tags. * Added possibility to view site software versions in WGS. * Added search fields into site UAC configuration section so that finding required item is easier. * Added support for adding shading colorants. * Added support for applying remove action only for current version of the formula. * Added support for assigning color to specific price group. * Added support for browsing replication log files and removing replication. * Added support for comparing prices of formulas in formula management history view. * Added support for creating shortcuts. * Added support for filtering formulas in matching results page. * Added support for generating and exporting ean-barcodes. * Added support for importing color cards from gdata. * Added support for importing gdata directly from installation path. No need to set the gdata into catalog. * Added support for importing largo rfl files. * Added support for marking formula dispensed in dispense queue. * Added support for removing local database data without needing to export it into s6local.Db * Added support for renaming colorants during import / export. * Added support for replicating siteconfig and clientconfig tables in local database. * Added support for setting all minimum or maximum amounts at once in formula management formula filter. * Added support for setting alternative colorant code and description. * Added support for setting maximum opacity de. * Added support for setting product specific scores. * Added support for sorting product and colorant in statistics. Also exporting in sorted order into pdf is now possible. * Added support for viewing and assigning products and color card to multiple zones. * Added support for viewing formulas in all units in import validation view. * Added template support for importing free text. * Added time stamp usage possibility for file name in xml auto exporter. * Basepaint fill level can also be set as gravimetric fill. * Extender support added. * Formula comment categorization implemented. * Included remote support into installer * Longer product description added. * Notification icon is displayed when new order feedback is detected in statistics orders page. * Search and correct in matching. ENHANCEMENTS: * Added base strength rule support in product rules section. * Added button for starting the remote support directly from the LAB and WGS. * Added checking if customer is used in multiple sites before deleting the customer. * Added checking if the network server ip address is set to static. * Added checking of bootstrap base in product remove functions. * Added color icons into statistics orders section. * Added feedback column into statistics orders section. * Added icons for can sizes in product configuration page so that it's easier to see which can sizes have barcodes. * Added missing configuration items to UAC. * Added possibility to characterize other bases without bootstrap. * Added possibility to generate pdf files with barcode images. * Added possibility to leave color names out when importing / exporting from innovatint database. * Added possibility to limit the displayed replication log by date and time. * Added possibility to move "reject" or "controlled and rejected" formula to current version (formula status will be updated at same time). * Added possibility to search and check where the barcode is assigned. * Added possibility to view product barcodes at once. * Added support for comparing sample calculations in characterization * Added support for copying formulas to all directions also in batch operations. * Added support for displaying also non sold products in statistics product page. * Added support for editing the formula comments. * Added support for enabling and disabling spectrophotometer. * Added support for exporting data in defined order and based on unit in text statistics colors exportation. * Added support for filtering also by formula comments * Added support for hiding unit symbols in free form text export. * Added support for identification card reader. * Added support for leaving the header out in free form export. * Added support for manual tinting machine. * Added support for new option prefer product rules in matching settings. * Added support for overriding rgb values in fill rgb section. * Added support for saving reflectance values from local database colors. * Added support for screen saver advertising. * Added support for selecting advertising images from images already existing in database. * Added support for selecting installation folder for site setup package if it is a LAB package. * Added support for selecting label templates from database templates. * Added support for selecting not to replicate localdata at all. * Added support for setting formula comments in batch operations. * Added support for setting id card information for site users in zone UAC. * Added support for setting pre fixes and re-coding color codes. * Added support for setting product groups in statistics products page. * Added support for skipping and automatically importing free text based on template. * Added tool button for opening network server log. * Added tool tip texts for matching setting weights. * Added warning about duplicate product definition during importation. * Also database user name is recorded into modification field. * Backup and recovery options are only available from the computer running the database. * Base paint matching type moved into more logical place matching and characterization -> product rules -> base paint rules. * Bootstrap setup page removed from POS installation package wizard. * Changed base strength step size form 1.0 to 0.01. * Changed color code max length to 40 characters. * Changed color name max length to 40 characters. * Changed product base scores can be sent freely in range 0-100. * Changed so that user is asked to save the standard measurement in color correction. * Changed the calculations in matching to take selected can into account. * Changing base strength value in product rules enables the save button. * Color correction page allows user to leave from the page without saving and come back later to save the changes. * Color difference function selection added into color difference section. * Color difference section loading speed improved. * Color management -> measure page doesn't clear the color code after the measurement have been made. * Color measure in color management section has been improved so that after save next color in the list is automatically selected. * Disabled clear log file button when running continuous replication (file is blocked while dbremote is running so removing is not possible). * Disabled replicate now button when running continuous replication. * Export templates for matching report work in progress. * For WGS network server added possibility to create installation packages for POS so that s6main and s6local data source names are used. * Formula filter improved so that filtering based on products and system rules is possible. * Formula management color loading changed to work in background thread so that user interface stays responsive. * General speedup in formula management section. * Grouped color names into column in statistics colors text export instead of multiple lines. * Improved database installation will only ask overwrite once for each separate item. * Improved free text import so that it will skip the measure date importation if no actual measurement has not been found from source file. * Improved loading speed of system specific rules. * Improved single item selection for data exportation. * Improved system/database overview loading speed. * Improved text export in statistics view the selected unit and table sort is kept during the export. * Improved time left estimation. * Improved usability in color correction section and added option to show only measured formulas. * Improved workgroup server correct user detection. (dba user is required for replication setup to work correctly) * In free text export by default colorants in formula are added to last in the row so that importing them in is easier. * Label printer will load the selected label preview automatically. * Massstone amount is shown as in export formats and in the ui also measuring the sample is possible without entering the amount. * Measure dialog remembers last used selections. * Measure section improved so that pressing enter will move do the current action and move to next one. * Moved zone selection to top level. * Price group information added to be listed in formula management. * Removed all other services from network server list. * Select last used zone in matching results and statistics page. * Site creation wizard will automatically select the correct message type if only one type is set into use. * System overview will now only calculate current version of formulas into product formula count. * Unused replication groups will be automatically deleted when site gets deleted. * User can now directly see from the internet update window what are the changes and also skip the update permanently. * User can't accidentally save measure changes without actually measuring. * User is now able to preview print templates in zones section without opening the easyprint. * Workgroup server possibility to set different ftp address for sites than for server. * Workgroup server site can't be created without replication group. * Workgroup server site installation package is created into selected directory if only one site is about to be created. * Zone which is used in replication cannot be deleted! BUG FIXES: * Color code search didn't work in color management when system was selected. * Fixed bug in color correction when user was creating totally new formula the base paint change was not taken into account when sending the formula to matching engine. * Fixed missing gdata dll:s caused import/export module to be disabled. * Fixed problem in free text export that can size or separator selections weren't updated to the background module unless one of the settings were changed. * Fixed problem of creating new manual dispenser into empty database. * Fixed problem of deleting templates in free text import. * Fixed problem of removing sites if site name had special characters. * Fixed problem of saving only LAB values for a color. * Fixed problem of using opaque standard in color correction section if the standard was measured in color correction page. * Fixed problem recovering data from latest database format. ("duplicate column thickness defined need a correlation name") * Fixed problem when entering options -> dispenser section. * Fixed problem with all colorants in formula filtering. * Fixed problem with exporting zone color names. * Fixed problem with overriding backups the last executed backup time was displayed incorrectly. * Fixed problem with saving matching report. * Fixed problems with inverse filtering in formula management. * Fixed problems with opaque characterization sample page showing values also for the rb. * Fixed program starting problems when demo period has expired. * Import template removal problem. * Matching report now shows also the default substrate not "error". * Replication problem when color is added to color card, formulas for that color did replicate correctly. * Setting fixed value for color card did not work correctly in free form text import. * Site UAC purge times where saved incorrectly into database and this caused the hanging on POS startup. * Sum/total calculation in formula management did not work correctly when user was creating new formula. * When adding multiple products or multiple color cards into zone the color card or product zone name was not automatically filled in.